kactus

Member Since: February 21, 2011

Country: United States

  • Product DEV-10039 | about 3 years ago

    Hi rleto577
    Yeah it looks like the form on this side ate a bunch of the code. Can you please post it either in the forum that Tempest2k8 suggested or in paste bin please?
    Thanks in advanced.
    Kactus

  • Product DEV-10039 | about 3 years ago

    Hi rleto577 thanks for this. I’ll go through this tomorrow and see if I can get it to compile since its thrown a bunch of errors (looks like it has stripped out anything in angled brackets so I’ll work out which includes it needs) and messed up the comments.
    From a glance it looks like its based off the can_shield_test pde so I should be able to work out what you changed.
    And I was referring to : http://pastebin.com/ :)
    Thanks again
    Kactus

  • Product DEV-10039 | about 3 years ago

    Hi rleto577
    Would you be able to post your code in pastebin? I’m been banging my head against the wall trying to get the canbus working with the mega, it always locks up on initialization. I’ve rewired the spi as per http://mcukits.com/2009/04/06/arduino-ethernet-shield-mega-hack/ but as far as I can see its using the avr io definitions that take into account the mega.
    I’ll be bald by the end of the week at this rate ;)

No public wish lists :(