Yang2w

Member Since: February 24, 2011

Country: United States

  • Product COM-09203 | about 2 years ago

    Okay, so I am pretty confused with the board. I know that the inverter, battery and el wire is working (hooked up manually), but when I plug everything into the board it refuses to run. I have used multiple example codes (make magazine article, the one above, etc) and two different boards. Also, I have soldered a jumper between the two grounds. I am using this inverter: http://www.sparkfun.com/products/10201 this battery: http://www.sparkfun.com/products/339 and these el wires: http://www.sparkfun.com/products/10199 http://www.sparkfun.com/products/10195 What else can I try? Edit: The board does a blink test fine

No public wish lists :(