×

SparkFun Electronics will be closed on July 3rd, 2015 in observance of Independence Day. Any orders placed after 2:00pm MT on July 2nd will be shipped out after the weekend. Thanks!

Member #209803

Member Since: March 11, 2011

Country: United States

  • This kit works fine under the right conditions. Night time with the antenna pointed in the right direction. Though the antenna wire broke on mine with my quick fix I thought I would be back to normal but it hasn’t worked right since. If the antenna setup was better this would be a great kit. The wire broke because I spent so much time getting this things placement perfect.

  • Finally!!! Set the -B switch to 32 and it started to work. The board works fine in Linux too!
    avrdude: AVR device initialized and ready to accept instructions
    Reading | ################################################## | 100% 0.02s
    avrdude: Device signature = 0x1e950f
    avrdude: safemode: Fuses OK
    avrdude done. Thank you.

  • Same issue here!

  • avrdude: initialization failed, rc=-1
    Double check connections and try again, or use -F to override this check.
    I get this error in Linux and Windows x64. Any known ways to fix this?

No public wish lists :(