bit_runner

Member Since: March 14, 2011

Country: United States

  • Product SEN-10221 | about 3 years ago

    Couple of things I wish they’d change about this: first, there is no change in resistance for the first 1" of liquid level, which makes it more challenging to use if you’re looking at lower liquid levels. Second, a wider resistance range would be much easier to work with. Right now it only varies between 0 and 700 ohms. So if you plan on using a voltage divider to measure the resistance changes, you’re going to be stuck with low resolution or wasted energy.

No public wish lists :(