irab88
Member Since: March 14, 2011
Country: United States
-
The one on 4D’s website is advertising all 3 variants. 1) no touch, 2) resistive touch, and 3) capacitive touch. The non-touch version is $99, while the one above is the resistive touch. The $5 price difference ($139 vs $144) seems to be SparkFun’s included Arduino shield.
-
Mouser P/N 854-PR1590B has (roughly) the same dimensions as the inside of this box. Mouser also carries this box, but not for the $4.95 price of SFE.
-
Thank you.
Still two dimensions left. Anyone? -
Dimensional Drawing
X=?
Y=?
D=? -
Probably not, as spark plugs pulse extremely fast with micro-amperes of current. You would need to have a very sensitive and accurate piece of equipment for that.
-
I don’t mean the sensor pins, but the other 4 (gnd, A1, B1, H1).
-
Bueller?… Bueller?…
-
Quick question to SF or anyone who has one of these:
What is the pin spacing of the 4 holes? (where the wires attach in the picture) Is it a standard .1", able to be mounted on a circuit board? Also, what is the diameter of the hole in the center?
To SparkFun:
A dimensional drawing would help tremendously. (IMHO)
–Ian
No public wish lists :(