rigziu

Member Since: March 14, 2011

Country: United States

Profile

Role

Student

Universities

UPR Mayaguez

  • Product CEL-09607 | about 3 years ago

    Hello Everyone,
    I am using an Arduino 2560 and a GSM cellular shield I purchased at Sparkfun (http://www.sparkfun.com/products/9607). My main goal is to access a website using TCP/IP. So far I have managed to establish socket connection but do not quite understand how to make an HTTP GET request using the GSM shield.

    My command are the following:

    AT+CGATT?
    AT+CGDCONT=1,“IP”,“epc.tmobile.com"
    AT+CGACT=1,1
    AT+SDATACONF=1,"TCP”,“136.145.34.23”,8080
    AT+SDATASTART=1,1

    AT+SDATASTATUS=1

    To this point I have established socket connection but am unsure as to how to execute an HTTP GET. My main goal is to visit : http://136.145.34.23:8080/Capstone/TesterGSM

  • Product CEL-09607 | about 3 years ago

    Did you resolve this issue ? I am running into the SAME EXACT problem

  • Product CEL-09607 | about 3 years ago

    Hello,
    Does anyone have any idea on the AT command for a GET HTTP request ?
    I need to basically access a website with the GSM 5100b

  • Product TOL-09672 | about 3 years ago

    Hello,
    Does anyone have any idea on the AT command for a GET HTTP request ?
    I need to basically access a website with the GSM 5100b

No public wish lists :(