We are still shipping! However, order processing may take longer than usual and we cannot guarantee same day shipments due to staffing guidelines from the CDC. Please see all COVID-19 updates here. Thank you for your continued support.


Member Since: April 8, 2011

Country: United States

  • I was unable to get ITG3200 (gyro) working for my
    IMU Digital Combo Board - 6 Degrees of Freedom ITG3200/ADXL345
    Arduino Pro Mini
    Logic Level Converter
    I tried address for gyro
    0x68 which is for combo board (0x69 for single gyro board);
    hence 0xD0 and 0xD1 for r/w
    outputs null for all registers with a1ronzo-6DOF-Digital-3585b54 from github page and many other examples on the net
    ADXL345 (accelerometer) works fine with both
    address 0x53
    0xA6 write
    0xA7 read
    Please help with my gyro! Any suggestions where I can look into? I suspect that Interrupt Cfg register needs to be set to disable interupts to output data continuously. If that's the case can you help me out with that!

No public wish lists :(