Erika

Member Since: April 15, 2011

Country: United States

  • Product BOB-09946 | about 3 years ago

    Yes. If you look at the top of the board, there are a set of pads labeled D1 on the left and D0 on the right. The D1 pad has a solder bridge to a high rail and the D0 pad has a solder bridge to a ground rail.

  • Product BOB-09946 | about 3 years ago

    Set D1 and D0 high or low directly.
    (D1, D0) - VOUT
    (0, 0) - 1.8V
    (0, 1) - 2.5V
    (1, 0) - 3.3V
    (1, 1) - 3.6V
    This datasheet has a bunch of circuit diagrams.

No public wish lists :(