×

SparkFun Electronics will be closed on November 26, 2020 and November 27, 2020 for the Thanksgiving holiday. We will begin normal operations at 9:00 AM Mountain Time on November 30, 2020.

×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Member #219055

Member Since: April 16, 2011

Country: United States

  • These do not work well for clamping the pins on any of the flex/force sensors that sparkfun recommends. The pins on the sensors are way too stiff for the connector and bend out of way. This connector is really meant to penetrate the flex circuit directly. The pins attached to the sensors are already spaced correctly for header so this isn't really doing anything anyway.

  • Be aware that if you want to flash ubilinux it seems that you will need to get the "Base" block - which doesn't come with this kit.

No public wish lists :(