Member #223750

Member Since: May 6, 2011

Country: United States

  • Product ROB-10735 | about 2 years ago

    I know it has been a while, but i thought i would give an update. The problem was definitely the current limit. Once i backed it off to an acceptable level the stepper started to work great. Thanks for the help!

  • Product ROB-10735 | about 2 years ago

    Could someone help me out with some trouble shooting. I am getting code to run the motor, but it is very erratic. Even when i send no signal to the board the stepper “chirps” or clicks every 1 second, and the led flashes brighter every one second. am i missing something obvious?

No public wish lists :(