Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.


Member Since: May 13, 2011

Country: United States

  • I bought 10 of these dongles recently although after looking at the "taking it apart" section my circuit layout is different probably a different version however the same problems exist with the BD address :( Even have some problems when using these dongles on two seperate computers when scanning for devices since the local and remote BD address is the same sometime it returns with a n/a for the name since it cant tell the local and remote devices apart. Nothing but trouble with these dongles :/ guess I will need to order 10 of a different brand. I guess alright for ppl who only want to use one dongle but WTH how can they produce these things they are not good in real world situations and being close to someone else with one of these devices is sure to cause problems.

  • This wont work because the HCI (Host Controller Interface) must be used to bring the adapter to the Running state. On top of that the device wont be discoverable unless put into inquiry scan mode which must be done through the HCI. The HCI is the physical connection between a bluetooth device and a computer hosting it so without a connection to a computer of some sort a bluetooth adapter can't be put into the correct modes to be discoverable. The only possible way to do this would be to rewrite the firmware for the device to make the default settings the ones needed then re-flash the chip on the adapter.

No public wish lists :(