×

Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.

Member #22879

Member Since: August 10, 2007

Country: United States

  • So, how can I have have one of these cables with both, male pins on which to mount a PiFace Digital2 board, and a female 40-pin 2x20 flat ribbon-cable header with which to attach a SparkFun Pi Wedge B+? I need to do PWM for an H-bridge and A-to-D on a solderless breadboard connected with a SparkFun Pi Wedge B+, and concurrently provide the functions supported by the PiFace Digital2 I/O board. I'm thinking an IDC header connector crimped into the length of the ribbon cable with a male-male 40-pin header plugged into it for the PiFace Digital2. I'm thinking a PiFace Pi-Rack http://www.newark.com/piface/pirack/pi-rack-raspberry-pi/dp/97W2503 may not be the best solution to providing PiFace Digital and breadboard functionality concurrently. Comments? LDighera@att.net

No public wish lists :(