avatar

neumeka

Member Since: June 23, 2011

Country: United States

  • Product ROB-12097 | about 3 weeks ago

    I can’t find a pinout anywhere for the mainboard. I’m trying to figure out which way my xbee should mount into the socket

  • Product ROB-09065 | last month

    Is there a servo mount for the micro servo? The only ones I saw were for larger ones

  • Product ROB-10825 | last month

    Got everything hooked up, but the motors are spinning at entirely different speeds. Just have really simple code (basically just motor.drive(100);). Any suggestions?

  • Product WRL-09954 | about 2 years ago

    Wow, great write up! I enjoyed your video. I’m a novice, but it was understandable.

  • Product ROB-10332 | about 3 years ago

    I admit that I’m pretty new at this stuff, but I had a lot of trouble mounting the medium servo to the claw. The round plastic part that attaches to the servo is very difficult to mount on the claw. The holes do not align well. I’d really appreciate if spark fun would provide mounting instructions.

  • Product KIT-10003 | about 3 years ago

    This is exactly what I needed, as a complete newbie. My only problem is that nothing in the kit is labeled, which makes it hard for someone as new to this hobby as myself to figure out what all the pieces are. But I guess that’s how you learn.

No public wish lists :(