babcoccl

Member Since: June 23, 2011

Country: United States

  • Product SEN-10167 | about 3 years ago

    A few things I did to get mine up and running with NetHoncho’s library:
    1. Make sure my ground bus was indeed grounded (oops)
    2. Remove the 4.7k resistor between Vcc and ground (not needed)
    3. Make sure I had Vcc hooked up to 5V rather than 3.3V, @ 3.3V I get the ACK time out.
    Hope this helps and thanks to NetHoncho for making a great library!

No public wish lists :(