Due to the impacts of the coronavirus outbreak, we are experiencing longer than normal lead times on certain products. We encourage back-ordering out-of-stock items to receive them as soon as possible.

Member #241629

Member Since: July 31, 2011

Country: United States

  • I purchased this sensor a few weeks ago. I was able to get up and running in a short amount of time using a UNO and the RHT03 library from adafruit. However, it appears that only the first few reads of the sensor are accurate. The sensor seems to be self heating at about 0.5 degrees C every 30 seconds. I am only reading every 30 seconds thinking that increasing the time between reads would reduce the self heating. Any suggestions?


No public wish lists :(