×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

Member #243994

Member Since: August 10, 2011

Country: United States

  • Product SEN-09801 | about 3 years ago

    To get data out of the 9DOF board, you have to run the non-interrupt program, because that board doesn’t break out the interrupt pins, and change the address from 0x69 to 0x68- the address pin is pulled on the 9 DOF i think.

No public wish lists :(