JGwinner
Member Since: August 18, 2011
Country: United States
-
Oh, also check out the LiPo USB car starters. They will put out some current!
-
I bought a Raspberry Pi UPS board and found that had a pretty good little charger; it'll put out some current too. I won't paste the link though as (I'm still investigating) I found that after a few hours it would shut off my Pi ... even when it had wall current. Still, it's something to consider. You don't have to have a Pi to use the UPS boards.
-
Is there a real time clock (RTC)? Couldn't find it on the spec sheets. Also, is there a USB3? Looks like just USB2 (I think that's an SoC limitation??)
-
I thought the Due was 3.3V? This board seems to be 5V from the diagram.
You got it to work with the Due without burning anything out?
-
Looks like a neat board
What's the accuracy in meters?
== John ==
-
length
I'd like to know about the extrusions as well. I want to route some 8' trim sections; width wouldn't be any wider than the stock machine which would make it easier.
== John ==
-
To everyone wondering: it's 51.10mm / 2" x 10.22mm / 0.4" x 3.19mm / 0.12"
-
A longer version as well would be great.
What kind of connector should be used with this sensor?
== John ==
No public wish lists :(