Member #24850

Member Since: September 26, 2007

Country: United States

  • Product COM-10017 | about 3 years ago

    There appears to be a fault in the infosheet that is included with this pack of SparkFun diffused LED’s: the example circuitry with AA battery four pack has the drawing of the LED mirrored. The ‘flat side’ is now opposite of where it should be and the long pin, that should be the cathode, is now denoted ‘G+’. The whole LED drawing should be mirrored over the horizontal axis to correct this error. Also, compared to the datasheet linked on this page ‘ R+’ en ‘ B+’ seem to be swapped.

Name Pieces Total
mintronics
9 10.45
Generic wishes
4 100.8