Member Since: September 15, 2011

Country: Italy


Spoken Languages


  • I'm using the "Breakout Board for XBee Module" to connect the "RN-XV WiFly Module" with Arduino and a breadboard.
    Arduino 3.3 => Pin 1
    Arduino GND => pin 10
    Arduino RX 0 => pin 2
    Arduino TX 1 => pin 3
    The files "WiFly_Test.pde" and "Credentials.h" properly modified, give me an output with some errors, but the IP address from the router gets without a password and WPA2.

No public wish lists :(