×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

SmplMan

Member Since: October 6, 2007

Country: United States

  • Product CEL-09607 | about 3 years ago

    This module came in the mail Monday and i have been messing with it since then. I have the sample sketch uploaded and running. This is the output i get,<br />
    <br />
    Starting SM5100B Communication…<br />
    …<br />
    +SIND: 1<br />
    <br />
    +SIND: 10,“SM”,1,“FD”,1,“LD”,1,“MC”,1,“RC”,1,“ME”,1<br />
    <br />
    +SIND: 11<br />
    <br />
    +SIND: 3<br />
    <br />
    +..IND: ..S. <br />
    <br />
    I have tried sending different AT commands with no luck. I get a response only if i enter any command twice.<br />
    <br />
    AT?<br />
    AT?<br />
    <br />
    +CME ERROR: 4<br />
    AT+SBAND=7<br />
    AT+SBAND=7<br />
    <br />
    +CME ERROR: 4<br />
    <br />
    Any ideas? I have tried switching the baud rates and that didn’t help either. Any help is appriciated.<br />
    <br />
    Thanks,<br />
    <br />
    Stephen

No public wish lists :(