IDfun

• Product SEN-10126 | about 2 years ago

  I managed to read multiple tags using the SM130 with a different firmware version provided by SonMicro. The method is described in this document.

  kind regards, Josh

• Product DEV-10406 | about 3 years ago

  Hi everyone,
  I’m wrinting an open online guide to using the SM130 with the arduino shield (also available on sparkfun) check it out if you are looking for help with the SM130 or add to the document if you have anything to share.
  the document can be found here
  Have fun!

• Product SEN-10126 | about 3 years ago

  Hi everyone,
  I’m wrinting an open online guide to using the SM130 with the arduino shield (also available on sparkfun)
  check it out if you are looking for help with the SM130 or add to the document if you haave anything to share.
  the document can be found here
  Have fun!

• Product SEN-10126 | about 3 years ago

  Hi TECA,
  I’m also looking for the answer to this question. I know that the MIFARE tags support an anti-collision function, however I do not know whether the SM130 supports that function as well..
  Has any one here successfully scanned multiple objects in the field of detection with the SM130?
  Kind regards,
  Josh

  EDIT 9-11-2011 I managed to read multiple tags using the SM130 with a different firmware version provided by SonMicro. The method is described in this document

  kind regards,

  Josh

No public wish lists :(