Bagel

Member Since: October 22, 2007

Country: United States

  • Product TOL-10624 | about 3 years ago

    I hate to say it but you haven’t included the actual iron. You know, the part that plugs into the base (which is pictured), into which the (included) tip should be inserted?

  • Product TOL-10448 | about 3 years ago

    Target, I’d wager.
    http://www.sparkfun.com/tutorials/59

  • Product TOL-10410 | about 3 years ago

    I don’t have this particular vise, but we’ve got a few Panavises around at work and I’ve found that compared to a third hand they don’t slide or lean even when you put decent pressure on the board (courtesy of the vacuum base) and it’s easier to get a board held in the vise just so. I would imagine this one is not quite as easy to grab with since its jaws are plastic vs. the rubber grippers on ours, but probably still easier than the third hand. You could probably address the gripping issue by dipping the jaw portion in plastidip or similar.

No public wish lists :(