Track My Order
Frequently Asked Questions
International Shipping Info
Mon-Fri, 9am to 12pm and
1pm to 5pm U.S. Mountain Time:
Chat With Us
November 28, 2011
News - What to do when you screw…
about 2 years ago
Bootloader loaded and working. When it comes time, SF should ask if the recipient wants a replacement or not. Personally, I do not need a free unit; all is well.
I used the end of plastic zip-ties (versus something metal) to pry the enclosure open as not to damage anything.
about 3 years ago
Received a couple of boards - I do like them. Would like to see a longer board of this type.
The one complaint - the holes on the outer power strips are not aligned with the inner holes. A bank of resistors for pulling lines high or low have to be angled. Many times I use a DIP switch bank and will not work on this board.
Are there solder pads on both sides of this board?
about 4 years ago
It is marked RES on the board; corresponds to pin 14 on the Xbee.
Tutorial - XBee Assembly Guide
about 5 years ago
I followed the directions here and all went well.
No public wish lists :(
Forgot your password?
No account? Register one!