×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

Member #272172

Member Since: December 5, 2011

Country: United States

  • Product BOB-11083 | about 4 months ago

    Has anyone had any luck using a software I2C library with this radio? I have my A4&5 pins tied up with other components on my Uno. If anyone has a library for using other pins could you share? Or detailed instructions on how to use some of the existing soft I2C libraries to make it work? Big Thanks!

  • Product GPS-11058 | about 2 years ago

    Wayne-

    I’m having issues even getting an Acknowledged statement. Can you post the code on how you are passing the command to the GPS?

    Thanks, Jim

  • Product GPS-10921 | about 2 years ago

    Can anyone help a newb trying to get this to work with an Arduino Mega? I have it receiving just fine, but it doesn’t want to accept binary commands to modify the frequency of data. I’m trying to pass the data this way:

    //Transmit GGA only from GPS Serial3.write((byte)0xA0); Serial3.write((byte)0xA1); Serial3.write((byte)0x00); Serial3.write((byte)0x09); Serial3.write((byte)0x08); Serial3.write((byte)0x15); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x00); Serial3.write((byte)0x08); Serial3.write((byte)0x0D); Serial3.write((byte)0x0A);

    All help is appreciated. Thanks.

No public wish lists :(