Users - Jdlee77 - SparkFun Electronics

News - October Caption Contest | about 5 months ago

Where are my 3D glasses when I need them….

Product COM-11950 | about 7 months ago

Aprox: 17 seconds Source: Igniters

I would not use this product for something that needs to ignite immediately. I would build in a delay to the code to start gas flow after a few seconds (until it gets hot) Plus im sure it draws a lot of power (not good for a portable project) For immediate ignition I would use the Spark Gap Igniter or the Piezo Igniter.

Product COM-11554 | about a year ago

I could have used a few of these a couple months ago! Fire Dept came through and said we didn’t have “Exit” signs above a couple of our warehouse doors. Paid $75 each from McMaster… McMaster Carr Exit Signs

Product DEV-11546 | about a year ago

It is the Rev 2, it has the mounting hole in the PCB.

News - Engineering Roundtable - … | about a year ago

Awesome project! This is definitely on my list to build. LEGO tank tracks work well for a small cable track.

News - According to Pete - DIY G… | about 2 years ago

This will come in handy for my Slaperoo project!

News - New Product Friday: Some … | about 2 years ago

Purchased!

News - Open Source Hardware Ques… | about 2 years ago

I am amazed and appalled that this is even a issue! OSI should be OPEN to the idea, not to mention grateful that the logo has a likeness to theirs. OF COARSE it has a likeness that is the point! If the guys over at OSI truly believe in the mission statement that is on their home page this would not be a issue. This is a huge step back for the Open Source community.