Wiseguy84

Member Since: December 18, 2011

Country: United States

  • Product COM-10819 | about 2 years ago

    Hi There, The little sheet packed with the leds is wrong. The sheet shows the negative attached to pin 2 and positive(via resistor) to the others. These LED’s are common anode (i.e. common positive) therefore you need to connect the positive to pin 2 and the resistors & negative to the other pins.

  • Product COM-10819 | about 2 years ago

    Does anyone know if the 20mA Imax is per colour or total combined?

No public wish lists :(