Member #279357

Member Since: December 29, 2011

Country: United States

  • Product SEN-10061 | about 2 years ago

    Have you tried the stock code first. I think you should try to load the stock hex file in arduino atmega328p and check whether it is working. in the stock replace the memory card write fuction with serial print fucntion so that you can view the data. If this works fine then you have error with your code. Also try to add some delay in you custom code before getting the chunks.

  • Product SEN-10061 | about 2 years ago

    Can you share you code with us.

  • Product DEV-10549 | about 2 years ago

    Jpeg trigger and Jpeg camera are good. But The latest libraries won’t work in arduino 1.0 . When will the code libraries updated for arduino 1.0.

    Also the atmega328p on jpeg trigger gets heated while under process. I have used 5volt DC supply for jpeg trigger. Why is at-mega328p heating beyond actual working noraml temperatures?.

    Also jpeg trigger make use of software serial to communicate with camera. Soft serial is little slower. Thus trigger takes time to get a picture. Again the chunk size is 32. Can I increase the chunk size to 64 or 72 or 80 to increase the speed of picture grapping process. Regards, P.R.B

No public wish lists :(