mayhem9

Member Since: January 9, 2012

Country: Slovenia

  • Product WIG-12000 | about 3 months ago

    I have built (iterating) a harp simulator for professional concert harpists to practice in silence. The arpeggios are the problem– Ideally it would be 47 channels of polyphony. Probably I can live with less, I just don’t know how much less. Worst case I can build/buy an analog mixer with 4 to 6 of your boards.

    FYI, for my existing application, your existing MIDI functionality will be sufficient for my application.

  • Product WIG-12000 | about 3 months ago

    I need more than 8 channels of polyphony. It would be great if you had a way to daisy chain the boards to a single output without using an external audio mixer. Also, where can I find which MIDI messages you support? It seems Note on/off, Velocity, and Channel.

  • Product DEV-09595 | about 2 years ago

    Example Sketch does not seem to be 1.0 compliant:

    Midi_Shield.cpp: In function ‘void Midi_Send(byte, byte, byte)’: Midi_Shield.pde:-1: error: ‘BYTE’ was not declared in this scope

    As of Arduino 1.0, the ‘BYTE’ keyword is no longer supported. Please use Serial.write() instead.

No public wish lists :(