Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.


Member Since: January 9, 2012

Country: United States

  • If you are using a Mega or Leonardo, the GPS code as provided with SoftwareSerial RX on pin 5 will not work (see http://arduino.cc/en/Reference/SoftwareSerial). You will have to reroute the shield pins 4 and 5 to other pins which support change interrupts. Or you can do what I did, and simply route the shield's serial pins to hardware serial pins on the Mega, and use Serial1-3 and eliminate the SoftwareSerial altogether.

    Thanks to Ho Yun for alerting me to the SoftwareSerial issue with the Mega.

  • Translation: I'm too lazy to read the datasheet or check back here for a reply.

No public wish lists :(