Users - lesto - SparkFun Electronics

Product COM-12096 | about 2 months ago

yes this is possible, but i’ve used the flame from a candlestick (pay attention as it can burn the wire)

Tutorial - RC Hobby Controllers and Arduino | about 2 months ago

Here my code: https://github.com/lestofante/arduinoSketch/tree/master/ClassPPM The code read the PPM on pin 2,4,5,6 and put in in a array. The value can be retrived with inputs.getDuration(X) where X is the POSITION IN THE ARRAY, witch is set in the ISR in InputPin.cpp

Product WRL-11395 | about a year ago

“You were the chosen one!” http://www.youtube.com/watch?v=HUBWxiu5cOo

Product WRL-11395 | about a year ago

does this mean I cannot make a raw TCP or UDP connection?

Product SEN-10724 | about 2 years ago

i was just asking and trying to help, not starting a flame-war :) and you are right, never think about failed board cost, but this should happen also for the other break out board, no? BTW i bought the 2 board on my first post :)

Tutorial - RC Hobby Controllers and Arduino | about 2 years ago

with the xbee just try to force the flush of the output. There should be a command, if not, the buffer size should be 32 char… :)

a 6channel 2.4GHz RX/TX can be bought at 25$ (see hobbyking), it cannot carry data, but it is fast, with a long range, anti-collision, and steal low bandwidth.

Tutorial - RC Hobby Controllers and Arduino | about 2 years ago

Use the interrupt luke:

(well, my code was easier but too long to be here so…)

http://code.google.com/p/aeroquad/source/browse/tags/AeroQuad_v2.4.3/Receiver.h

News - March Caption Contest | about 2 years ago

“Where did the SMD resistor fell?” (someone tell him a drop smd resistor is a lost smd resistor)

News - A Good Ol' Fashioned Capt… | about 2 years ago

“the king of the resistance”

Product SEN-10724 | about 2 years ago

why is this board $20 more expansive than ITG-3200+ADXL345 HMC5883L

it should be less expansive, because of board density (n° of PCB/m²)