×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

Member #288641

Member Since: January 11, 2012

Country: United States

  • Product SEN-08880 | about 11 months ago

    My two cents worth:

    I did a multi-point calibration, with focus around 0.08BAC (for obvious reasons). With a 4.7k resistor (found it gave a good range) I found the following to be pretty accurate: BAC = (X/928)4.85 Where X is the analog voltage on an input pin on an Arudino Uno, sensor driven at 5V.

    Cheers.

No public wish lists :(