Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.


Member Since: January 11, 2012

Country: United States

  • I got the Edimax WiFi adapter as part of the Raspberry Pi 2 Starter Kit, so I can't post this as a review since I didn't purchase it directly. However, I wanted to share that I tried plugging the adapter into my LEGO Mindstorms EV3 and am happy to report that it works perfectly (EV3 firmware version 1.08H).

  • The real test is Circuit #13. If page 69 of your copy of the guide is anything like mine, it will be an exciting race to see which blows first, the diode or the transistor. Pay careful attention to the polarity of the diode (it's wrong in the breadboard diagram in my copy of the guide.) The cathode (black band) should be on the "+" side of the relay coil. The connections list on page 70 is also wrong (in a totally different way.) The schematic on page 68 is correct.

No public wish lists :(