Hello and Welcome! If you have a technical question please check out our Forums. If you have an order or shipping question please refer to our Customer Support page. Please see all COVID-19 updates here and thank you for your continued support.


Member Since: January 29, 2012

Country: United States

  • First - Thanks Fearlessnight! Lot of fun and great first smd project. There's not many and the layout and resist make it super easy.

    I fixed a weird a problem...if anyone is seening the same thing here's what I did.

    Initially, tested LED orientation, continuity, R values per circuit.

    And while it worked at 3v - off an adj power support - worked perfectly. It didn't at 4.5-5v. Two LEDs stayed "stuck" on until there was a large sudden noise (like a clap), two other LEDs mostly always flickered...back to 3v and it worked great again.

    I still don't know the exact problem, but I decided to remove and test and resolder R5,6 since they set the voltage midpoint and maybe there was a teeny bridge which made a difference at higher voltages? And while I still get the same readings as before now it works fabulously.

No public wish lists :(