×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

Tin_tin98N

Member Since: February 14, 2012

Country: Norway

  • Problem loading new firmware from: http://sourceforge.net/projects/serialglcd/files/, i hocked up an "Arduino One" as programer, and downloaded firmware, used CommandPrompt in Win7 with avrdude. The first command i Tried (from folder with SummoningDark’s firmware):

    avrdude -P COM5 -b 19200 -c avrisp -p m168 -v -e -U flash:w:main.hex resulted in:

    avrdude: stk500_paged_write(): (a) protocol error, expect=0x14, resp=0x6 avrdude: stk500_cmd(): programmer is out of sync

    Solution:

    After som reading, I found a tip lowering baudrate:

    In arduino enviroment, the Scetch ArduinoISP(the scetch downloadet to the programmer) I found the line Serial.begin(19200);, CHANGED it to: Serial.begin(9600); tried again with avrdude:

    avrdude -P COM5 -b 9600 -c avrisp -p m168 -v -e -U flash:w:main.hex

    == problem swolved

  • Are The Test Firmware v22 located on http://github.com/a1ronzo/SparkFun-9DOF-Razor-IMU-Test-Firmware usable for this IMU? I can't find the old versions there. Current firmvare uses a triple axis gyro. this one has 2 gyros.

No public wish lists :(