Member Since: February 20, 2012

Country: United States

  • GOT IT!! On the UNO: CS = Arduino pin 10 = D3 on PCB | MOSI = Arduino pin 11 = CMD on PCB | SCK = Arduino pin 13 = CLK on PCB | MISO = Arduino pin 12 = D0 on PCB

    According to schematic pin 12, MISO, does not need any level shifting, connect direct to Arduino. I am using a MC14050BCPG level shifter to put out the 3.3V. Arduino 1.0.5 with SD.h library

  • Was anybody able to get the 7 Segment Pineapple Library written by Quin to work? I tried to trouble-shoot the library and had no success.

No public wish lists :(