Member #303467

Member Since: February 21, 2012

Country: United States

  • Product COM-11155 | about a year ago

    Here’s how to wire this, based on my own trial and error just now. Power into the switch goes to the silver pin on the end (opposite the gold pin). Power to your project goes from the center (silver) pin. Ground goes to the gold pin. This allows the LED and the project to be powered on and off correctly. Ground only goes to this switch because of the LED. On the two-pin (non-LED) version of this switch, ground would just go directly to your project and the switch would have power-in on one pin and power-out on the other.

No public wish lists :(