Member #304357

Member Since: February 24, 2012

Country: United States

  • Product ROB-10507 | about 2 years ago

    Because the motor terminals are not labeled A or B, like they are for the easy driver and big easy driver, I am unsure how to wire my motors properly. I’ve looked at the schematic as well as the eagle file but it is still unclear. My wires are as follow: A (red, red/white) and B (green, green/white). That being said, and orienting the quadstepper with channels 1 and 2 on the top and 3 and 4 on the bottom (looking straight on at it), could someone please elaborate on how to connect my motor wires from left to right?

    Hereh is a link to the motor wriing schematic:

    http://www.google.com/imgres?q=haydon+kerk+wiring+diagram&um=1&hl=en&sa=N&rls=com.microsoft:en-us:IE-Address&rlz=1I7GWYE&biw=1280&bih=555&tbm=isch&tbnid=1wYd2-TL3h_xCM:&imgrefurl=http://www.haydonkerk.com/LinearActuatorProducts/StepperMotorLinearActuators/LinearActuatorsHybrid/tabid/73/Default.aspx&docid=3ezGtgt1T3teVM&imgurl=http://www.haydonkerk.com/Portals/0/site%252520images/Actuators/hybrid%252520linear%252520actuators/stepper_motor_linear_actuator_wd.gif&w=418&h=305&ei=lbJTT6zqJIHo0QGev4D3Dg&zoom=1&iact=hc&vpx=508&vpy=245&dur=1445&hovh=192&hovw=263&tx=117&ty=125&sig=113776035042348209545&page=1&tbnh=103&tbnw=137&start=0&ndsp=22&ved=1t:429,r:11,s:0

No public wish lists :(