Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you


Member Since: February 27, 2012

Country: United States

  • Product CEL-09607 | about 2 years ago

    hello all i have a problem with module, i connected it with arduino uno board and i uploaded simple code as following: [


    char incoming_char=0; NewSoftSerial cell(2,3); void setup() { Serial.begin(9600); cell.begin(9600); } void loop() { if(cell.available() >0) { incoming_char=cell.read(); Serial.print(incoming_char); } if(Serial.available() >0) { incoming_char=Serial.read(); cell.print(incoming_char); } }


    and i have the response as following : { +SIND: 1

    +SIND: 10,“SM”,1,“FD”,1,“LD”,1,“MC”,1,“RC”,1,“ME”,1       +SIND: 1

    +SIND: 10,“SM”,1,“FD”,1,“LD”,1,“MC”,1,“RC”,1,“ME”,1

    } and continually repeat these two lines. please tell me what to do for this problem my e-mail is : m.mood123@hotmail.com thank you

No public wish lists :(