Member #305763

Member Since: February 29, 2012

Country: United States

  • Product ROB-10333 | about 2 years ago

    I bought two of these motors and am having trouble getting either to work with the Servo… Sweep sketch. Any suggestions? Has anyone had similar problems:

    After uploading Sweep, the first servo rotates smoothly in one direction but then is jumpy as it rotates in the other direction. The second servo likes to move back and forth around a specific angle and then jumps around a bit before returning to the back and forth motion…

  • Product ROB-10333 | about 2 years ago

    I bought two of these motors and am having trouble getting either to work with the Servo…Sweep sketch. One of them rotates smoothly in one direction but then is jumpy as it rotates in the other direction. The other likes to move back and forth around a specific angle and then jump around a bit before returning to the back and forth motion.

    Has anyone had any similar problems? Any advice? Thanks.

  • Product ROB-10333 | about 2 years ago

    I bought two of these motors and am having trouble getting either to work with the Servo…Sweep sketch. One of them rotates smoothly in one direction but then is jumpy as it rotates in the other direction. The other likes to move back and forth around a specific angle and then jump around a bit before returning to the back and forth motion.

    Has anyone had any similar problems? Any advice? Thanks.

No public wish lists :(