Rafiki92

Member Since: March 2, 2012

Country: United States

  • News - According to Pete - July … | about 2 years ago

    5:57 I laughed so hard. “Ehhhh… And, uh, you know. Les Paul necks are good, but ehhh… I dunno.”

  • News - All hail Tech Support! | about 2 years ago

    Toni always knows the answer!

  • Product COM-10801 | about 2 years ago

    Random flickering and dimming can be easily fixed by cutting away the heat shrink, and reflowing the solder connections between the panel and the I/O wires. The panels are quite fragile, so you may find yourself fixing them a number of times throughout a project.

  • News - New Product Friday: Joint… | about 2 years ago

    I hope the EL Sequencer revision fixes the compatibility issue with the 3.3v Sparkfun Inverter (output wires of the inverter are flipped on half of them, however, the inverter still passes QC since the output wire orientation doesn’t matter when going from battery -> inverter -> panel/wire). Though maybe this would be fixed more simply by having a QC that checks the inverter with the board (both output wires are black, so it can be super confusing).

No public wish lists :(