stevenblake

Member Since: March 4, 2012

Country: United States

  • I find that the pitch and roll angles don’t seem to be independent. I’m using the firmware from the hookup guide that lets you turn the Euler angles on and off with the ‘e’ command and while the yaw seems right, the others are confounded. If you rotate the board about the x axis, the y axis changes significantly as well and vice versa. But rotating about z (laying board on table and twisting) only affects the z axis. Any idea why this is? It’s not very useful if you can’t separate the axes…

  • I find that the pitch and roll angles don’t seem to be independent. I’m using the firmware from the hookup guide that lets you turn the Euler angles on and off with the ‘e’ command and while the yaw seems right, the others are confounded. If you rotate the board about the x axis, the y axis changes significantly as well and vice versa. But rotating about z (laying board on table and twisting) only affects the z axis. Any idea why this is? It’s not very useful if you can’t separate the axes…

  • I’d like to make an RFID scanner that can sense when someone with a tag walks through a doorway and read an ID off that tag. Is that something that this module can do? If not, anyone have a suggestion for one that would work? Thanks!

No public wish lists :(