Forgot your password?
No account? Register one!
March 10, 2012
News - New Product Friday: Dumps… |
Whats the cost of the Dumpster dive?
Product TOL-10410 |
maybe this: https://www.sparkfun.com/products/11524
You will also need a servo.
News - AVC 2014: Bots, Copters, … |
about 2 weeks ago
Whats your wild fire situation at that time of year?
There are a lot of small butane “blow” torches out there.
This reply and this one seem to contradict each other.
This has always been the case. All entrants get a review before they can enter the competition.
Still think you need to think through this a little bit more. I know quads can cause damage if they hit someone but how bad would it be if there were razor blades on the tips of the rotors? Maybe all weapons must be fixed ie no spinning blades with a big disclaimer that the decision of the judges is final.
couldn’t find anything and I also added some other things to my post that you may want to address unless you want this to be like a Saw movie. :)
Note I have never seen a Saw movie but i think the point is still valid.
Can you shoot down the balloons like this?
Because now you are getting into world of drones which I understand are officially illegal. ;)
But for real here I think you need to amend the rules for no projectile weapons, just like in battle bots. Also have you thought about flying planes with razor blades on the leading edge of their wings and other popping devices.
News - ElectriCute - Elastolite … |
You would still need the black vinyl to block out the light.
If you cut the black vinyl and then applied it without weeding it (removing the parts you don’t want) first you get a light mask, the part that remains and a paint mask, the part you remove.
Yea I’ve been watching Face Off on Syfy for years and there is something that they spread out to make skin. But the contestants are always worried about the edges. Its what gives it away.
Maybe you will see something like this on the show. In just the last year or so they have started to use more stuff like EL wire.
I posted these comments on the You tube page for this but think it would also be good to post them here.
mactac makes a vinyl that is white but with a black underlayment that blocks light. Much easier than two layers of vinyl. Its called IMAGin digiTrans™ product number JDT429 bad news that it only comes in 54 and 60 width rolls. ETA: Its a printable vinyl and with the right printer so you could print the model’s skin tone on to it.
Also if you could have extended the decal further than the panel, rounded the corners and maybe made the edges wavy, you could have blended it in better. Nothing screams sticker like straight lines.
Not sure how well the adhesive on the vinyl would affect skin. Its designed to stick to things like the sides of vehicles for 3 to 5 years so it maybe too aggressive.
News - You have been randomly se… |
about a month ago
You are worried about dogs? I guess you missed this from some months past.
How do I beer?