hillfire

Member Since: January 23, 2008

Country: United States

  • Product DEV-09627 | about 2 years ago

    It should be clearly stated in the product description that the Vout on this board is set for 3.3v. If you are using this with the 5v Pro Mini w/ 5v peripherals, you will have to pass through the RAW and skip the shield’s regulator altogether.

    If you want to use PWM with the FETs, you can only directly modulate 4 of them (D3,D5,D6,D9). If necessary, you could wire across from D10 and D11 to use all 6 PWM channels.

No public wish lists :(