Caeshe

Member Since: March 27, 2012

Country: United States

  • Product CEL-09427 | about 2 years ago

    hi, I just bought this card. I see you’re from México, like me. Did you have any trouble connecting the module to TELCEL’s net, I mean, you used the SIM form your cellphone?

    I have troubles when I power the module. I made a comment describing my problem, it’s at the bottom on the page. Could you help me please? Thanks in advance

  • Product CEL-09427 | about 2 years ago

    Hi! I have the evaluation board and the module, but I’m having trouble connecting it to a net.

    As Carnagio said, I used a 115200 baud rate in the Terminal program for connecting the board to the computer. In the tutorials I have read, I saw that I must be replied with 5 lines when powering the module.

    In my case, I receive 5 characters of garbage (Just as Carnagio), then two correct lines, which are

    +SIN: 1 +SIND: 10, “SM”,1,“FD”,1,“LD”,1,“MC”,1,“RC”,1,“ME”,1

    but then the comunication stops, and I receive nothing else, and if I send any AT command, I don’t get response.

    After those 2 lines, I’m suppose to receive these adittional 3 lines +SIND: 11 +SIND: 3 +SIND: 4

    these lines are sent to confirm the connection to my local network, so I think that’s the problem. I have the antena connected, so that shouldn’t be the problem. I’m in México, working with a TELCEL SIM card.

    If anyones can give me a clue of what’s wrong, I’ll be glad to here it. Thanks in advance

No public wish lists :(