March 28, 2012
about 2 years ago
The computer being used is a Dell Vostro desktop, I think that the problem is one of insufficient power being outsourced from the USB port. If a USB 3 port is used then the programmer does not start to fail until the program reaches approximately 2000 bytes. I am using Windows 7 operating system. When I get time, I want to supply the ATtiny85 on the programmer with an external power supply.
In using the tiny AVR programmer to program using Arduino 1.0, I normally get the following error while trying to upload the simple blink program:
avrdude: verification error, first mismatch at byte 0x0080
0x3b != 0xff
avrdude: verification error; content mismatch
If the mismatch occurs at byte 0x100 or higher, the program runs. How do I resolve this problem? I have also tried Arduino 1.0.4. I am selecting UStinyISP as the programmer.
No public wish lists :(
Forgot your password?
No account? Register one!