Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.


Member Since: March 30, 2012

Country: United States

  • Does anyone know what Ls value I should use for determining the Tpd2stby delay? (Table 16 of the nRF24L01P datasheet) Thanks

  • If anyone is interested, I just used this device with MATLAB for a senior design project. I used this ANT stick, with the FTDI COM port drivers listed above and used a serial object in MATLAB to connect with it.

    Here is a link with the .m files I used. I made a separate function for each applicable ANT command. Hopefully this helps someone out.

    I was communicating with the "Transceiver nRF24AP1 with Trace Antenna" also from SparkFun connected to an MSP430 experimenter board using asynchronous UART communication and it worked quite nicely.

    The MATLAB code is linked below.

    For the record, I am not in any way shape or form associated with ANT, Dynastream Innovations Inc.,FTDI, Sparkfun, or anyone else, this is just some code I wrote for a school project, and you should use at your own risk (although it's literally just a bunch of functions that use the fwrite command to send properly formatted ANT messages)

No public wish lists :(