Headbonk
Member Since: February 1, 2008
Country: United States
-
Are the I2C pins available for use off the board?
-
Are the I2C pins available for use?
-
Can these be converted to a 2x3 header with a pair of diagonal clippers?
-
I see the 6 holes for the isp on this. Do I need to get some male header pins (http://www.sparkfun.com/commerce/product_info.php?products_id=778) to adapt it to the female connector on the programmer? Or does the pocket programmer include something that will work with the holes?
-
Here’s some shots of an interesting use of these things for contact detection on a robot over at Hacked Gadgets:
http://hackedgadgets.com/2008/04/13/map-bot-floor-mapping-robot/
No public wish lists :(