CCPM

Member Since: April 23, 2012

Country: United States

  • Product DEV-09530 | about 2 years ago

    FYI: I was getting:

    avrdude.exe: stk500_getsync(): not in sync: resp=0x00

    when I tried flasing latest firmware to some new OpenLog cards using FTDI breakout. I was able to work around this by using 115200 baud instead of 57600:

    C:\openlog>avrdude.exe -p atmega328p -P COM6 -c stk500v1 -b 115200 -Cavrdude.conf -U flash:w:main.hex

    The older cards seem to require 57600 the 10 new cards all required 115200. I didn’t find this documented anywhere.

No public wish lists :(