×

Our Technical Support team will be out of the office on Wednesday, April 23 starting at 12pm. Tech Support will reopen with normal hours on Thursday, April 24 at 9am. Thank you

Sebo

Member Since: April 26, 2012

Country: United States

  • Product SEN-10061 | about 2 years ago

    Thank you, that’s exactly what I was looking for.

  • Product SEN-10061 | about 2 years ago

    I am not able to change the image size, it is always 320x240. I have tried sending the command to change the size to 640x480 (56 00 31 05 04 01 00 19 00), and I receive the correct response from the camera (76 00 31 00 00). Then, I reset or power cycled the camera as instructed, but the image size does not change.

    Everything else is working properly, but I cannot get past this issue. Has anyone else run into this? Is there some step not listed in the datasheet that I’m missing? Or, is this an issue with my camera and should I try ordering another one?

  • Product SEN-10061 | about 2 years ago

    I am encountering a very odd problem, and I can’t find any information about anyone seeing anything similar. I have this camera connected to a PIC and I am trying to receive a first image across, but I the data coming back across seems to get stuck on sending the same byte over and over. Pseudocode for what I am doing is:

    CameraTakePicture(); //camera correctly responds 76 00 36 00 00

    CameraReadImageSize(); //responds 76 00 34 00 04 00 00 31 10

    CameraReadImage(int numBytes);

    My calculations for passing in the correct MH,ML,KH,KL values are correct, so this is not the problem is. If I pass in 400 bytes for instance, the camera responds 76 00 32 00 00 FF D8 FF FE 00 24 36 0F D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3 D3…

    Furthermore, sending another command to the camera, I receive only D3s numbering equal to the number of bytes of the expected return command.

    Please let me know if you have encountered this problem or if you have suggestions for what I could try. I can provide a lot more information if needed.

No public wish lists :(