×

Please see all COVID-19 updates here as some shipments may be delayed due to CDC safety and staffing guidelines. If you have an order or shipping question please refer to our Customer Support page. For technical questions please check out our Forums. Thank you for your continued support.

LarryV

Member Since: May 18, 2012

Country: United States

  • Does anyone know what the required code changes are to use the code at (http://serialglcd.sourceforge.net/) for use with the 160x128. Is it just the hard coded display size or is driving the 160x128 different in any way to the 128x64?

  • Found an error on the board, when you cut and jumper sj2 for an external antenna the ground to the headphone jack is left floating. Running a jumper from the headphone ground to a ground near by fixes the problem. Had to remove the voltage dividers on all the i/o lines to use this on a system that has 3.3v i/o pins.

No public wish lists :(